• Measuring Range 0~150mm/0~6 Inch, With Resolution 0.02mm/0.0005 Inch
• LCD Display, Accuracy +/1 0.02mm, 0.001 Inch,
• 4 Way measurement (Inside, Outside, Depth, Step).With thumb lock and bezel.
• Easy change to mm and Inch, Reset Zero,

Range: 0-10mm Resolution: 0.01mm 1.100% brand new and high quality!

Precise and professional made, stable performance.

Metering the concentricity of principal.

Easy and convenient to use.

Function: Metering the concentricity of principal axis

Telescopic Gauge

Used with an outside micrometer for measuring inside diameter of bores.

DIGITAL INFRARED THERMOMETER -50 TO 550 DEGREE 

An infrared thermometer is a thermometer which infers temperature from a portion of the thermal radiation sometimes called blackbody radiation emitted by the object being measured. They are sometimes called laser thermometers as a laser is used to help aim the thermometer, or non-contact thermometers or temperature guns, to describe the device’s ability to measure temperature from a distance. By knowing the amount of infrared energy emitted by the object and its emissivity, the object’s temperature can often be determined. Infrared thermometers are a subset of devices known as “thermal radiation thermometers

Measuring Range: -50 to 550 °C(-58~716 °F)

Resolution: 0.1°C or 0.1°F

Accuracy: 0°C~380°C=+/-1.5°C, -50°C~0°C=+/-3°C

Repeatability: +/-1% of reading or1°C

Spectral Response: 5-14um

DIGITAL LUX METER 

it’s used for checking the level of luminance; luminance is a measure of the amount of light falling on a surface. It is defined as: ‘the density of the luminous flux incident on a surface’. 

Telescopic Gauge

Used with an outside micrometer for measuring inside diameter of bores.

The digital luxmeter is a professional instrument for measuring illumination and brightness, which can be used in light intensity measurement engineering, quality control, illness prevention and treatment and measurement of light intensity in all kinds of environments such as factories, schools, offices, transportation routes, families, etc. The digital luxmeter boasts the following features:1. Measure current illumination and temperature.2. Measure difference value, max value and min value.3. Switch between illumination and temperature unit.4. The measurement range is (0-200000) lux, auto switch of measurement gear.5. Automatic storage and manual storage of illumination data.6. Setting of automatic power off.7. Backlight and data holding.8. The digital luxmeter is equipped with APP which passes through Bluetooth, so as to facilitate all kinds of operations on the digital luxmeter (For the Bluetooth version only).

• Measuring Range: 4 * 90�; Resolution: 0.1�; Unit: �, %, mm/m, in/ft.
• Built-in magnets for attaching securely to any metallic surface.
• Easy-to-read digital rotatable display with backlight for quick viewing.
• With HOLD function to freeze the measurements, easy to check and record the data.
• Automatically turned off if there's no operation in 1 minute, energy saving.

Cross hatch Cutter to assess the adhesion paint coatings(thickness) and instant assessment of the QUALITY of the bond to the substrate.

Product Description

• Product: The set features 10 individual steel blocks of various angles, 0.25 inch thickness, accuracy +/-20 seconds, 0.0001 inch per inch
• Features: Hardened steel material, precision grinding
• Application: For precise angular alignment and measurement for grinder and milling applications
• Carrying Case: Hard shell box are easy to carry Includes: 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30 degree hardened steel blocks

In cases where surface roughness needs to be measured with great precision, elaborate instruments must be used. These are expensive, and often unsuitable for workshop use, where roughness of machined surfaces can usually be assessed conveniently and with sufficient reliability using visual and tactile (fingernail) comparison with a standard set of surfaces machined in the same way. Rubert's range of Roughness Comparison Specimens can help in such cases. They are simple to use, inexpensive, and hence widely used in many different applications. The golden rule to follow, is to use comparison specimens which have been machined by the same process as the workpiece being checked.

This set consists of 30 comparison specimens, covering six of the most commonly-used machining methods: 6 cylindrically turned, 6 end-milled, 6 horizontally milled, 6 surface-ground, 3 lapped, 3 reamed/drilled. The label states the Ra values of each specimen in both metric and imperial units.

• SA2.5 Surface Roughness Comparator Type S
• Conforming to ISO Standard 8503 Part 1
• Rubert England MADE
• Comparator for After blast cleaning With Shot Abrasives
• Fine Grade, Medium Grade, Coarse Grade

334 Rubert England casting microfinish comparator RA, AA, CLA, RZ surface roughness finish comparators to check the quality and roughness of casting in foundry

Product Specification